DeviceNet/DCON Gateway

 

Introduction
  The I-7241D is one of CAN bus products in ICP DAS. The device offers the communication gateway between DeviceNet and DCON protocol. DCON protocol is the communication protocol of I-7K and I-87K series IO modules of ICP DAS. And the I-7241D can be a DeviceNet slave device in CAN bus for DeviceNet network. It is a Group 2 Only Slave device, and supports “Predefined Master/slave Connection Set”. In addition, we also provide the utility software for users to configure the device parameters and build EDS file for the DeviceNet slave device. Users can easily apply I-7k and I-87K IO modules in DeviceNet applications with the I-7241D.
Features
Group 2 Only Slave 
Support of Predefined Master/slave Connection Set 
Dynamic Assembly Objects Mapping 
Support of Offline Connection Set, Device Heartbeat message and Device Shutdown message 
Provide Assembly object 
Dynamic Product EDS File
I/O operating modes: Polling, Bit-Strobe, Change of State/Cyclic
Support max 15 I-7K/I-87K IO modules
Baud Rate: 125Kbaud, 250Kbaud and 500Kbaud
Provide friendly Utility to configure
On-line change baud rate and MAC ID of CAN
NS, MS and IO LED indicators
7-segmemt LED to show operation mode, MAC ID, baud rate and error code
Specifications
CPU:80186, 80MHz 
Philip SJA1000 CAN controller 
Philip 82C250 CAN transceiver
SRAM:512K bytes
Flash Memory:512K bytes
EEPROM:2k bytes
Real Time Clock
Built-in Dual-Watchdog
16-bit Timer
2500 Vrms isolation on CAN side
Power Supply:20W
     Unregulated +10VDC to +30VDC
Operating Temperature:-25°C to +75°C
Storage Temperature:-30°C to +85°C
Humidity:5%~95%
NS, MS and IO Led directors
COM1
RS-232
RS-232: TXD,RXD,RTS,CTS,GND
Communication speed: 115200 max.
Configure tool connection
COM2
RS-485: D2+, D2-
Communication speed: 115200 max.
Connect to DCON IO modules
Display
7-segmemt LED to show operation mode, Node ID, CAN baud and RS-485 baud

Manual