Intelligent RS-232 to CAN converter

 

Features 
Microprocessor inside with 20MHz  
CAN interface connector: D-Sub 9-pin 
82C250 CAN transceiver 
One CAN and RS-232 Port
Built-in CAN/RS-232 Converter firmware 
Max transmission speed up to 1M bps for CAN and 115.2K bps for RS-232   
Software configurable CAN and RS-232 communication parameters
Max transmission distance over 1000m (follow CAN specification) 
Support both CAN 2.0A and CAN 2.0B 
Build-in jumper to select 120 ohm terminal resister 
Mount easily on DIN-rail 
Power, data flow and error indicator for CAN and RS-232 
Watchdog inside
Specifications    
RS-232 interface connector: D-Sub 9-pin   
CAN interface connector: D-Sub 9-pin  
Isolation voltage: 3000Vrms on the CAN side   
Repeater request: over than 1000m (suggestion)   
Communication speed:  
115.2K bps max for RS-232 
1M bps max for CAN
Accessories: One D-Sub 9-pin cable 
Operating temperature: -25℃ to +75℃ 
Storage temperature: -40 to +80 
Dimensions: 123mm x 72mm x 33mm  
Power requirement: Unregulated 10~30 Vdc with protection from power reversals 
Power consumption: 1W    
Applications 
Factory Automation   
Building Automation 
Home Automation  
Control system
Monitor system
Vehicle Automation   
Software Utility Feature:
CAN bus Baud rate configuration 
CAN acceptance filter configuration 
CAN 2.0A or 2.0B specific selection 
RS-232 Baud rate and data bit setting 
RS-232 checksum selection 
RS-232 responded selection 
Easy test to transmit/receive can messages 

Manual