10 Base-T to FX Media Converter  

  The NC-10TF series consists of three models of media converters: NC-10TFT,NC-10TFC. These converters are designed to convert 10 Base-T to /from 10 Base-T to/from 10 Base-FX media type. The NC-10TF series supports three fiber media types: multimode ST and SC connectors respectively. All three models support convenient connection to either a straight-through or a cross-over cable on the UTP end. The NC-10TF series converters are cost effective and easy solutions for use in a mixed cabling environment or extending the network span to include a fiber optic backbone.
Complies with 802.3 10 Base-T and 10 Base-FL standards
Provides media conversion from UTP to Fiber Optic media types
Extends network span up to 2km(multimode fiber) 
Provides a push button to set crossover function for the TP port
Interoperable with other 10Base media converters, 10Base,  NICs, hub or switching
Provides LEDs for easy network monitoring
Supports a variety of fiber optic connectors including duplex multimode ST, SC


Standard IEEE-802.3 Ethernet 10 Base-T and 10 Base-FX
Fiber Port Multimode ST , Multimode SC , 
Fiber Cable Multimode 850nm 62.5/125um fiber cable(max.distance:2km)
TP Port Shielded RJ-45 jack
Cable Cat.5 UTP cable(100m max.)
LEDs -Power status
-Link and receive status for TP port
  -Link and receive status for fiber port
Environment Temperature: 0C to 50C
  Relative Humidity : 10% to 90% non-condensing
Dimension 150mm x 26mm x 125mm
Power DC10~30V  3W